New Machines: 1-502-883-2214 | Used Machines: 1-810-370-1262

Insulation Accessories

internal wetting systems
(download internal wetting system information)
Insulation Accessories
spray equipment
(download spray equipment information)Insulation Accessories
Dense pack kits
Insulation Accessories
M-3 water pumps
Insulation Accessories
We stock all Mark II clear 2″, 2.5″, 3″, 3.5″, 4
insulation blowing hose (50′ per section)
Insulation Accessories
Steel hose connector tubes
available in 4″, 3.5″, 3″, 2.5″, 2″
Insulation Accessories
1.25″ & 1.5″ I.D. Braided retrofit wall tubing
(8′ sections each)
Insulation Accessories

In Stock 2.5″ FLEX lead, wallspray hose
(12.5′ sections)
Insulation Accessories

wall scrubber by KrendlInsulation Accessories
Steel Reducer tubes
from 4″-3.5″, 3.5″ -3″, 3″-2.5″, 3″-2″
Insulation Accessories
3″ & 4″ blowing hose clamps
available and in stock
Insulation Accessories

Krendl Insulation Accessories

View Krendl accessories below or download the entire list of Krendl insulation accessories here.

Hose
  • H317 Flexhaust – 2″ x 50′
  • H318 Flexhaust – 2 1/2″ x 50′
  • H319 Flexhaust – 3″ x 50′
  • H329 Flexhaust – 3 1/2″ x 50′
  • H330 Flexhaust – 4″ x 50′
  • H340 Flexhaust – 5″ x 50′
  • H430 Flexhaust – 6″ x 25′ H400 Smooth bore – 4″ x 50′ H418 Vacuflex – 2″ x 50′
  • H419-A Vacuflex – 2 1/2″ x 12 1/2′
  • H419-B Vacuflex – 2 1/2″ x 25′
  • H421 Vacuflex – 3″ x 50′
  • H422 Vacuflex – 4″ x 50′
  • WT-100 Wall Tubing Winter 1 1/4″ WT-125
  • Wall Tubing Winter 1 1/2″ ST-100
  • Wall Tubing Summer 1″ ST-125
  • Wall Tubing Summer 1 1/4″

Extension Cords

  • EXTCORD-A EXTCORD-B EXTCORD-C EXTCORD-D EXTCORD-E EXTCORD-F EXTCORD-G EXTCORD-H EXTCORD-I EXTCORD-J EXTCORD-L EXTCORD-M
  • 250A SI 250A DI 325 425 SI 425 DI 475 575 SI 575 DI
  • 1300, 2300 1300, 2300 1300, 2300 2300 4BLR
  • 50 FT. 12-3 Cord w/15A. Plugs
  • 100 FT. 10-3 Cord w/15A. Plugs
  • 50 FT. 10-3 Cord w/30A. Twist Lock Plugs
  • 50 FT. 12-3 Cord w/20A. Twist Lock Plugs
  • 100 FT. 8-3 Cord w/30A. Twist Lock Plugs
  • 100 FT. 10-3 Cord w/20A. Twist Lock Plugs
  • 50 FT. 10-4 Cord w/30A. Twist Lock Plugs
  • 100 FT. 8-4 Cord w/30A. Twist Lock Plugs
  • 50 FT. 8-4 Cord w/50A. Plugs
  • 100 FT. 8-4 Cord w/50A. Plugs
  • 50 FT. 12-3 Cord w/15A. Twist Lock Plugs 100 FT. 10-3 Cord w/15A. Twist Lock Plugs

(Machine Cord Options)

  • (1) of EXTCORD-C or (1) of EXTCORD-E
  • (2) of EXTCORD-A or (2) of EXTCORD-B
  • (1) of EXTCORD-A or (1) of EXTCORD-B
  • (1) of EXTCORD-A or (1) of EXTCORD-B
  • (2) of EXTCORD-A or (2) of EXTCORD-B
  • (2) of EXTCORD-A or (2) of EXTCORD-B
  • (1) of EXTCORD-G or (1) of EXTCORD-H
  • (1) of EXTCORD-L and (1) of EXTCORD-C or (1) of EXTCORD-M and (1) of EXTCORD-E (1) of EXTCORD-G or (1) of EXTCORD-H
  • (1) of EXTCORD-C or (1) of EXTCORD-D (1) of EXTCORD-E or (1) of EXTCORD-F (1) of EXTCORD-I or (1) of EXTCORD-J

Recycle Vacuum Wands

  • 250600-B 250600-D
  • Vacuum wand, 4″ PVC (4′ Long) Vacuum wand, 5″ Aluminum (4′ Long)
Connector Tubes
  • 365 Y-Connector – (steel) 2″ to 2 1/2″
  • 366 Y-Connector – (steel) 2″ to 3″
  • 366A Y-Connector – (steel) 2 1/2″ to 3″
  • 367 Y-Connector – (steel) 2 1/2″ to 4″
  • 367A-1 Y-Connector – (steel) 2″ x 2″ x 2″
  • 367C-2 Y-Connector – (steel) 2 1/2″ x 2 1/2″ x 2 1/2″
  • 367B-1 Y-Connector – (steel) 3″ x 3″ x 3″
  • 367D-1 Y-Connector – (steel) 3″ x 3″ x 4″
  • 377 Tube, Connector – 2″ x 5″
  • 379 Tube, Connector – 2 1/2″ x 5″
  • 379-S Connector, Swivel – 2 1/2″ x 6″
  • 380 Tube, Connector – 3″ x 5″
  • 380-S Connector, Swivel – 3″ x 6″
  • 383 Tube, Connector – 3 1/2″ x 5″
  • 381 Tube, Connector – 4″ x 5″
  • 381-S Connector, Swivel – 4″ x 6″
  • 250600-19 Tube, Connector – 5″ x 5″
  • VH550-5 Tube, Connector – 6″ x 5?

Dense Pack Nozzles

  • KD1 2 1/2″ Krendl dense pack nozzle
  • KD3 3″ Krendl dense pack nozzle

Reducers & Nozzles

  • 355 Reducer tube
  • 357 Reducer tube
  • 358 Reducer tube
  • 359 Reducer tube
  • 368 Reducer tube
  • 369 Reducer tube
  • 362 Reducer tube
  • 371P Reducer tube – 6″ to 4″ (plastic) 362B
  • Reducer nozzle – 2″ to 1″
  • 362D Reducer nozzle – 2″ to 1 1/4″
  • 362-P Reducer nozzle – 2″ to 1″ (plastic)
  • 363-M Masonry nozzle – 2″ to 5/8″ (fits #362B)
  • 374 Bushing reducer – 3″ to 2 1/2″ (f/1300/2300)
  • 375 Bushing reducer – 3″ to 2″ (f/1300/2300) *Bushing reducers also available for models 450, 500, 1000, & 2000*

Hose Reels

  • 328 36″ Dia. (Floor mount – holds 150 ft. 3″ hose)
  • ST328 36″ Dia. (Wall mount – holds 150 ft. 3″ hose)
  • ST329 44″ Dia. (Wall mount – holds 150 ft. 4″ hose)
  • 349-A 90″ Dia. (Wall mount – holds 200 ft. 4″, 3 1/2″, or 3″)
  • KS333-A 90″ Dia. (Wall mount – holds 150 ft. 3″ & 150 ft. 4″)

Hose Clamps

  • 337 Clamp for 2″ hose
  • 339 Clamp for 2 1/2″ hose
  • 339A Clamp for 3″ hose
  • 339B Clamp for 3 1/2″ hose
  • 340 Clamp for 4″ hose
  • 341 Clamp for 5″ and 6″ hose
  • 337 Clamp for 2″ hose
  • 339 Clamp for 2 1/2″ hose 339A Clamp for 3″ hose
  • 339B Clamp for 3 1/2″ hose 340 Clamp for 4″ hose
  • 341 Clamp for 5″ and 6″ hose
  • Hose Reels

Wall Spray Upgrade Kits

Get a turnkey wall spray system. Expand your services that you can fulfill and generate more revenue.

Turnkey wall spray systems start as low at $3700. For more pictures,pricing options or to answer any additional questions, please email us anytime at insulationmachineindustries@hotmail.com or call us at 810-701-301

Insulation Accessories

Air Pressure Tester

Insulation Accessories

This unit consists of our 0-15 p.s.i. liquid filled pressure gauge mounted to a 5″ diameter disc with a rubber surface. The contractor presses the gauge/disc assembly against the output tube of the machine with blower (only) running and it will indicate the pressure of the airlock. Great for testing blowing/spraying pressure and airlock seal condition or replacement.

Replacement airlock seals for all Cool Machines and Krendl Machines.

Insulation Accessories

Blown and Spray Insulation Accessories

We offer a full line up of spray insulation accessories for your new or existing truck or trailer insulation set up. From wireless remotes to stud scrubbers we offer the industries most effective no nonsense user friendly accessories developed by us to make your operation run smoother,neater,and more organized.

Internal Wetting System

This wetting system is great for low dust, stabilized cellulose applications. Read more here.

Insulation Accessories

275 Gallon Poly Tanks

Does your machine setup install or wallspray applications apply much less than it blows attics and retros? Of course it does!!! These 275 gallon poly tanks are the best solution for a truck or trailer system that needs to switch from attics to a occasional wall spray job that jumps on the schedule in a hurry. Portable, lightweight, affordable and highly recommended.

Insulation Accessories

Wireless Remote Control

Insulation Accessories

Portable Generator, 15000 Rated Watts, 22500 Surge Watts

Mfr. Model # 5734

120/240 Voltage, Circuit Breaker Protected, Engine Size 992cc, Run Time @ Full Load 5 Hr/Tank, Run Time @ 1/2 Load 10 Hr/Tank, Fuel Tank Capacity 16 Gal, Starter Type Electric/Recoil, Air Cleaner Type Standard, Low Oil Shut Down, Engine Brand Generac OHVI, Includes Wheel Kit, Lifting Eye, Maintenance Kit And First Oil

Insulation Accessories

Item Portable Generator
Rated Watts 15,000
Surge Watts 22,500
Voltage 120/240
Amps @ 120/240V 125/62.5
Circuit Breaker Protected
Engine Size 992cc
Engine Alternator Brushless
Run Time @ Full Load (Hr./Tank) 5
Run Time @ 1/2 Load (Hr./Tank) 10
Fuel Tank Capacity (Gal.) 16
Starter Type Electric
Air Cleaner Type Standard
Low Oil Shut Down Yes
Length (In.) 48.5
Width (In.) 31
Height (In.) 39.5
Engine Brand Generac OHVI
Mounting Type Vibration Dampeners on Engine and Generator
Max. AC Watts 22,500
Full Power Switch Yes
Fuel Type Gas
Outlet (1) 120V 20A Duplex, NEMA 5-20R, (1) 120V 20A Duplex NEMA 5-20R GFCI, (2) 120V 30A NEMA L5-30R Locking Type, (1) 120/240V 30A NEMA L14-30R Locking Type, (1) 120/240V 50A NEMA 14-50R, (1) 12VDC/10A
Run Time Hour Meter Yes
Bearing Type Machined Sleeve Bearing With Pressure Lube
Cylinder Material Cast Iron
Includes Wheel Kit, Lifting Eye, Maintenance Kit And First Oil
Warranty (Years) 2 Limited

Portable Generator, 17500 Rated Watts, 26250 Surge Watts

Mfr. Model # 5735

120/240 Voltage, Circuit Breaker Protected, Engine Size 992cc, Run Time @ Full Load 5 Hr/Tank, Run Time @ 1/2 Load 10 Hr/Tank, Fuel Tank Capacity 16 Gal, Starter Type Electric/Recoil, Air Cleaner Type Standard, Low Oil Shut Down, Engine Brand Generac OHVI, Includes Wheel Kit, Lifting Eye, Maintenance Kit And First Oil

Insulation Accessories

Item Portable Generator
Rated Watts 17,500
Surge Watts 26,250
Voltage 120/240
Amps @ 120/240V 145.8/72.9
Circuit Breaker Protected
Engine Size 992cc
Engine Alternator Brushless
Run Time @ Full Load (Hr./Tank) 5
Run Time @ 1/2 Load (Hr./Tank) 10
Fuel Tank Capacity (Gal.) 16
Starter Type Electric
Air Cleaner Type Standard
Low Oil Shut Down Yes
Length (In.) 48.5
Width (In.) 31
Height (In.) 39.5
Engine Brand Generac OHVI
Mounting Type Vibration Dampeners on Engine and Generator
Max. AC Watts 26,250
Full Power Switch Yes
Fuel Type Gas
Outlet (1) 120V 20A Duplex, NEMA 5-20R, (1) 120V 20A Duplex NEMA 5-20R GFCI, (2) 120V 30A NEMA L5-30R Locking Type, (1) 120/240V 30A NEMA L14-30R Locking Type, (1) 120/240V 50A NEMA 14-50R, (1) 12VDC/10A
Run Time Hour Meter Yes
Bearing Type Machined Sleeve Bearing With Pressure Lube
Cylinder Material Cast Iron
Includes Wheel Kit, Lifting Eye, Maintenance Kit And First Oil
Warranty (Years) 2 Limited

Portable Generator, 8000 Rated Watts, 12000 Surge Watts

Mfr. Model # 5606

120/240 Voltage, Circuit Breaker, Engine Size 410cc, Run Time @ Full Load 4 Hr/Tank, Run Time @ 1/2 Load 8 Hr/Tank, Fuel Tank Capacity 9 Gal, Starter Type Electric/Recoil, Air Cleaner Type Single, Low Oil Shut Down, Engine Brand Generac OHVI, Includes First Oil, Maintenance Kit, Wheel Kit And Cord Set, Ship Weight 278 lbs.

Insulation Accessories

Item Portable Generator, Electric
Rated Watts 8000
Surge Watts 12,000
Voltage 120/240
Amps @ 120/240V 66.66/33.33
Circuit Breaker Yes
Engine Size 410cc
Engine Alternator Brushless
Run Time @ Full Load (Hr./Tank) 4
Run Time @ 1/2 Load (Hr./Tank) 8
Fuel Tank Capacity (Gal.) 8
Starter Type Electric/Recoil
Air Cleaner Type Single
Low Oil Shut Down Yes
Length (In.) 32 1/2
Width (In.) 26
Height (In.) 29
Engine Brand Generac OHVI
Mounting Type Vibration Dampeners on Engine and Generator
Max. AC Watts 12,000
Max. VA 12,000
Full Power Switch Yes
Fuel Type Gas
Outlet (2) 20A @ 120V Duplex GFCI 5-20R / (1) 30A 120/240V L14-30R
Run Time Hour Meter Yes
Bearing Type Machined Sleeve With Pressure Lube
Cylinder Material Cast Iron
Includes First Oil, Maintenance Kit, Wheel Kit And Cord Set
Warranty (Years) 3

Wall Spray Vacuum Wand

Insulation Accessories

Wall Mount or Floor Mount Hose Reel

Wall Mount/Floor Mount Hose reel selections 34″ & 48″ available

Insulation Accessories

New cordless Cool Tool wall scrubbers!!!

Dimensions: 20″ wide roller for 16″O.C. studs x 16″ long handle. This unit weighs 12.2 lbs. and feels a little heavy for it’s size. It can easily reach 8 ft. ceilings and yet be used in small congested areas like closets and under stairs.

Mini-Cordless & Closet Scrubber

Includes charger and two (2) batteries.

Insulation Accessories

Insulation AccessoriesWall Scrubber

Our wall scrubber is an important tool that is used to remove excess spray-on insulation level (flush) with wall studs, allowing for easy installation of drywall. The ‘wall scrubbing’ process must be fast and easy, resulting in a clean, smooth surface that will compliment both the fiber and the spray operator.

The “COOL Tool” is a proprietary hybrid wall scrubber design that combines the best of the “T” frame technology (edge cutting), and the It’s your Insulation Business. It’s your Investment Decision. It’s our job to make it COOL.

Standard Features and Benefits

  • Ultra light-weight (9.8 lbs), reduces operator fatigue
  • Balanced universal handle that allows convenient reach of 10 ft. ceilings and comfortable reach from ladder/scaffolds.
  • Hybrid roller design that combines ‘edge cutting’ performance with two roller supports, offering extended bearing and roller life.
  • Reduced roller diameter that requires reduced motor power and eliminates fiber thrown onto operator.
  • 1/8 HP TENV motor that comes sealed to extend motor life
  • Quick-change rollers that can be replaced in minutes on the job site / no tools needed
  • “U” frame technology (durability). This cutting edge design provides a rock solid unit that is extremely rugged, easily serviced, exceptionally well balanced and light-weight (9.8 lbs). These elements provide the Industry’s highest performance, lowest weight wall scrubber, with impressive finished results.

Wall Scrubber Specifications

Weight
9.8 lbs.

Dimensions
27″ Wide x 35″ Long

Materials

High impact aluminum, Black powder coated, and Safety belt guard

Motor
1/8 HP TENV

Compare our Cool Tool with other “T” Frame Scrubbers

  • Weight: many of the “T” Frame scrubbers weigh almost 20 lbs.
  • Durability: single roller support results in poor bearing life and high incidence of bent roller shafts.
  • Awkward: rollers throw fiber from wall onto the operator.

Compare our Cool Tool with other “U” Frame Scrubbers

  • Edge Cutting: stationary roller supports ‘pull’ fiber from the wall and fail to clean fiber from stud corners.
  • Motor Life: fiber contamination into the motor significantly reduces motor life.