CM 2400: Blown in Insulation Attic Machine
Our entry-level insulation machine provides a common sense solution for contractors that have smaller jobs and need the portability.
The 2400 series machine provides an economical, high production machine with low power requirements and reduced weight/size in your truck/trailer system. The simple design and minimal moving parts provide a machine that is low maintenance and easy to repair.
All-Fiber, Wall Spray, Attic Blow Machine
Material | Production Rate/hr |
Cellulose | 3600 lbs 120 bags |
Fiberglass | 900 lbs |
Rockwool | 1800 lbs |
Features of the CM 2400 Insulation Machine
- Large 11 cu./ft. hopper capacity fiber storage.
- Stainless slide-gate control provides precise control of fiber.
- High quality powder coating provides a long lasting corrosion resistant finish.
- Modular design with see-thru access panels for quick troubleshooting and maintenance.
- Slow speed positive feed‚ scalping‚ augers extend component life, while increasing safety.
- Large 12″ X 12″ quick release airlock is a durable, easily serviced component.
- High speed stainless shredder maximizes fiber conditioning, coverage, and production.
- High torque (1250 in./lb.) motor/reducer drive provides surplus power
- #50 chain and hardened sprockets, are rugged, corrosion resistant, and positive driving.
- Two integrally mounted 3-stage blowers w/check valve protection, outside air and reduced filter
maintenance. (optional four blower or P.D. blower) - 150 ft. remote cord w/cord hanger, offers convenient handling of remote device.
Electrical Components
- Safety Features: kill switch and manual controls promote increased operator safety and quick
hazard response. - Manual thermal overload protection of all motors and electrical components.
- Deluxe voltmeter for quick electrical diagnostics.
Specifications
Weight | 650 lbs (2 blower) |
Dimensions | 42″ L x 22″ W x 48″ H |
Hopper Capacity | Main Hopper: 11 cu/ft (2 bags) w/Hopper extension: 22 cu/ft (4 bags) |
Airlock | 12″ long x 12″ diameter 3″ output for blowing hose slide-out airlock |
Blower | Two, 2-stage (120 volt 8 amp) Two, 3-stage (120 volt 12.5 amp) Four, 3-stage (120 volt 12.5 amp) 5 hp PD blower |
Power Requirements | Double input, 20/30 amps 120 volt or Single input, 30 amp 240 volt (four 3 stage blowers or 5 hp PD blower) |
Generator Size | 7,500 watt (2 blower) 15,000 watt (4 blower or 5 hp PD blower) |
Options | Blower Hopper Extension Wheel Package w/ Brackets |