New Machines: 1-502-883-2214 | Used Machines: 1-810-370-1262

Cool Machines 23 HP Premium Insulation Removal Vacuum

23hp insulation removal vacuumFor large square footage jobs/high production, high frequency use.

Insulation removal vacuum specifications

  • Weight: 295 lbs.
  • Dimensions: 33″ long x 28″ wide x 38″ high
  • Engine: Briggs “Vanguard” V-twin OHV, 5 gallon tank, positive pressure lubrication, low level oil shutdown, oil pressure shutdown switch. [electric start]
    Briggs & Stratton engine
  • Fan Housing: 1/4″ AR-400 steel fan x 1/4″ AR-400 steel chamber.
  • r.p.m. / hour meter
  • Engine Warranty: 3 year commercial
  • 6″ dia. Inlet and Exhaust
  • 10″ dia. Run-Flat Wheels
  • Electric start with included 12 volt battery
  • Integrated engine block cooling air filter.

Don’t forget to protect your investment…

See our insulation vacuum savers.

 

Cool Machines 16 HP Premium Insulation Removal Vacuum

16hp insulation removal vacuumFor medium square footage jobs or high frequency use.

Insulation removal vacuum specifications

  • Weight: 250 lbs.
  • Dimensions: 33″ long x 28″ wide x 38″ high
  • Engine: Briggs “Vanguard” V-twin OHV
    Briggs & Stratton engine
  • 2.25 gallon tank
  • Positive pressure lubrication, low level oil shutdown
  • Oil pressure shutdown switch. [electric start]
  • Fan Housing: 1/4″ AR-400 steel fan x 1/4″ AR-400 steel chamber.
  • r.p.m. / hour meter
  • Engine Warranty: 3 year commercial
  • 6″ dia. Inlet and Exhaust
  • 10″ dia. Run-Flat Wheels
  • Integrated engine block cooling air filter.

New & Improved

HardoxTM, AR-400 abrasion resistant 1?4″ thick impeller blades and turbo-sonic ‘FC’ designed blade, creates tip turbulence eliminating wet fiber accumulation on blade and chamber. Solid robotic welds and precision dynamic balancing provide a smooth running blade with minimal wear to engine bearings insuring safety for the operator.

Heavy duty 1?4″ HardoxTM abrasion resistant armor plate wear strip chamber, triples life of a chamber. Sacrificial liners need regular monitoring to prevent catastrophic failure inside fan chamber. This new chamber design eliminates need for a sacrificial liner.

Don’t forget to protect your investment…

See our insulation vacuum savers.

Cool Machines 6.5 Horse Power Mini-Vac

6hp insulation removal vacuumFor small jobs and DYI or rental machines.

Insulation removal vacuum specifications

  • Weight: 110 lbs.
  • Dimensions: 29″ long x 25″ wide x 38″ high
  • Engine: Briggs OHV Dura-lubeTM, 900 Series I/C cast iron sleeve,  .725 gallon tank [manual pull start]
    Briggs & Stratton engine
  • Fan Housing: 1/4″ AR-400 steel fan with steel chamber
  • r.p.m. / hour meter
  • Engine Warranty: 2 year consumer/1 year commercial
  • 6″ dia. Inlet and Exhaust
  • 10″ dia. Run-Flat Wheels

Briggs & Stratton engines are produced by the largest gas engine manufacturer in the world (over 12,000 authorized dealers in North America). Briggs has the largest dealer/service network in the United Sates with the most comprehensive parts inventory. With 24 hr. parts availability and multiple service locations within a 30 mile radius throughout the country, you have the best support system available to keep your engines running.

The premium grade ‘Vanguard’ engine is a high quality engine (with 3 year commercial warranty) manufactured in Japan and is widely considered the ‘best’ in the industry.

Don’t forget to protect your investment…

See our insulation vacuum savers.

Krendl GV180 Vacuum

Krendl’s GV180 gas vacuum has 6″ inlet and outlets to compliment an 18hp Briggs & Stratton V-Twin motor and 18″ steel fan.  All together this brings you the ability to move 7,000 pounds of cellulose insulation per hour.

gv180 Krendl insulation removal vacuum

Krendl GV230 Vacuum

The GV230 belt-drive gas vacuum packs a punch with the 23 HP Briggs & Stratton motor. Don’t forget the input and output safety switches, 11 inch run-flat tires and long-lasting powder coating.  The large steel fan is 18″ in diameter. The Krendl GV230 vacuum can process 9,000 pounds of insulation an hour.

Krendl gv230 insulation vacuum

Krendl Vacuum Recycler Upgrade

The Krendl vacuum recycler upgrade is intended for fiber insulation.

Passages stay clear thanks to rubber wipers.

Easy hopper removal thanks to hinge latches.

Clean up is easy with removable screens.

Minimize dust with filter bags.

Dual agitators condition fibers.

6″ inlet and outlet for easy hose connections.

25 foot remote cord and 50 foot of 110 volt power cord.

Safety switches, pre-alarm, disconnect shutdown, and emergency kill switch.

At 654 pounds (550/VH550) and 240 pounds (GV180) the Krendl vacuum recycler upgrade measures 38″W x 25 1/2″D x 77″H (550/VH550) and 27″W x 36″D x 45″H (GV180) and has a 10 cubic foot hopper capacity (550/VH550) with 11amps vertical agitator and 15 amps airlock motor (10″ x 12″ diameter airlock).  Outlet and inlet measure 3 inches.

Krendl insulation recycler