Krendl 475 Insulation Machine Blower

• up to 2100 pounds an hour of cellulose
• up to 700 pounds an hour of fiberglass
• Double input, 15/15 amps each/120 volt/60 hz
• International – Single input, 16 amp 230 volt/50 hz
• 14 cubic foot hopper capacity
• 355 pounds
• 40.5?Wx31.5?Dx62?H
• 14 amp blower with 2 stages – 140 cfm at 31/2 psi
• 2″ x 10″ airlock

KS-260 Wall Spray System by Krendl

4,200 pounds of cellulose insulation per hour, approximately 73 cubic feet capacity, 10 hp blower system

1 1/4″ diameter shafts

KS-260 Wall Spray Insulation Equipment:

• 25 cubic foot capacity  recycle hopper
• filter box to minimize dust
• 10 hp blower system – located under dry hopper
• 15 hp vacuum system – located inside truck for easy maintenance
• generator options
  • 60kw pto (power take off) – 60kw generator
  • 60kw generator set – 100 hp diesel engine w/60kw generator

Optional Insulation Equipment

• 230 gallon water tank
• wall scrubber
• parallel handle with extension
• toolbox
• 44 inch hose reel for 4 inch vacuum hose
• 36 inch hose reel for 3 inch blower hose
• 3″ blower hose
• 90″ hose reel for 4″ vacuum hose
• 4 foot long vacuum wand

Krendl 425 Insulation Machine Blower

Cellulose:  1100 lbs and hour with 8 amp blower / 1200 lbs an hour with 14 amp blower

Fiberglass:  200 lbs an hour with 8 amp blower / 300 lbs an hour with 14 amp blower

Mineral Fiber:  600 lbs an hour with 8 amp blower / 800 lbs an hour with 14 amp blower

7 cubic feet hopper capacity

220 lbs

36 inches wide

25 inch diameter

44 inches high

Krendl 325 Insulation Machine Blower

Cellulose: 900 lbs/hr

9 cubic feet

Dual Agitators

8 amp/2-stage (120 volt)

8″ x 8″ diameter (20.3 cm. x 20.3 cm. diameter) 2.5″ (6.4 cm.) Outlet

145lbs/28.5″ W x 29.5″ D x 49.5″ H

Single input, 15 amp/120 volt/60 hz

Krendl 575 Insulation Machine Blower

The Krendl 575 all fiber machine provides 800-1000 pounds an hour of fiberglass production, up to 2700 pounds an hour for mineral fiber, and up to 2800 pounds and hour for cellulose.

With a 14 cubic foot hopper capacity, dual agitators and see-through acrylic safety guard you’ll be sure to get maximum productivity, safely.

This 380 pound insulation machine measures 40.5″ W x 31.5″ D x 62 ” H.

Don’t forget the LED buttons, digital meters, and dual, variable blower controls.

Krendl 5200 Insulation Machine Blower

62 cubic foot hopper capacity can process up to 2,300 pounds an hour of fiberglass and 5,200 pounds an hour of cellulose.

Diesel & PTO

• 2120 lbs
• 43″W x 80″D x 83″H

Electric

• 1700 lbs
• 43″W x 70″D x 83″H

Positive Displacement Blower in 250 cfm (6psi) diesel or 220 cfm (5psi) electric

18″ x 14″ diameter airlock with 4″ outlet

Triple Agitators

2 year warranty