New Machines: 1-502-883-2214 | Used Machines: 1-810-370-1262

Krendl 475 Insulation Machine Blower

  • up to 2100 pounds an hour of cellulose
  • up to 700 pounds an hour of fiberglass
  • Double input, 15/15 amps each/120 volt/60 hz
  • International – Single input, 16 amp 230 volt/50 hz
  • 14 cubic foot hopper capacity
  • 355 pounds
  • 40.5?Wx31.5?Dx62?H
  • 14 amp blower with 2 stages – 140 cfm at 31/2 psi
  • 2″ x 10″ airlock

Krendl insulation blower 475

KS-260 Wall Spray System by Krendl

4,200 pounds of cellulose insulation per hour, approximately 73 cubic feet capacity, 10 hp blower system

1 1/4″ diameter shafts

KS-260 Wall Spray Insulation Equipment:

  • 25 cubic foot capacity  recycle hopper
  • filter box to minimize dust
  • 10 hp blower system – located under dry hopper
  • 15 hp vacuum system – located inside truck for easy maintenance
  • generator options
    • 60kw pto (power take off) – 60kw generator
    • 60kw generator set – 100 hp diesel engine w/60kw generator

Optional Insulation Equipment

  • 230 gallon water tank
  • wall scrubber
  • parallel handle with extension
  • toolbox
  • 44 inch hose reel for 4 inch vacuum hose
  • 36 inch hose reel for 3 inch blower hose
  • 3″ blower hose
  • 90″ hose reel for 4″ vacuum hose
  • 4 foot long vacuum wand

Krendl insulation wall spray system

Krendl 425 Insulation Machine Blower

Cellulose:  1100 lbs and hour with 8 amp blower / 1200 lbs an hour with 14 amp blower

Fiberglass:  200 lbs an hour with 8 amp blower / 300 lbs an hour with 14 amp blower

Mineral Fiber:  600 lbs an hour with 8 amp blower / 800 lbs an hour with 14 amp blower

7 cubic feet hopper capacity

220 lbs

36 inches wide

25 inch diameter

44 inches high

krendl insulation equipment 425

Krendl 325 Insulation Machine Blower

Cellulose: 900 lbs/hr

9 cubic feet

Dual Agitators

8 amp/2-stage (120 volt)

8″ x 8″ diameter (20.3 cm. x 20.3 cm. diameter) 2.5″ (6.4 cm.) Outlet

145lbs/28.5″ W x 29.5″ D x 49.5″ H

Single input, 15 amp/120 volt/60 hz

Krendl insulation machine 325

Wasp by Intec

Cellulose – 1750 lbs/hr

Fiberglass – 475 lbs/hr

Rockwool – 1115 lbs/hr

31-3/8″W x 33″L x 44″H

  • 280 lbs
  • 3″ House Outlet Size
  • 12″ Steel Airlock
  • 2 stage blowers – 2 x 8.5 amp = 17 amp 2 x 101 cfm = 202 cfm
  • 115 VAC / 60 Hz, (2) 10/3 x 100′

intec wasp machine

Turbo Force by Intec

Cellulose:

  • 128 bags/hr
  • 53 lbs/min
  • 3200 lbs/hr

Fiberglass

  • 40 bags/hr
  • 20 lbs/min
  • 1200 lbs/hr

Stonewool

  • 105 bags/hr
  • 52 lbs/min
  • 3150 lbs/hr

intec turbo force blower machine