Insulation Machines

Insulation Machines, Blowers & Equipment

Attic & Dense Pack Machines

Insulation Blower

CM 700 Production Rates:
1,000 pounds an hour cellulose
200 pounds an hour fiberglass

Click here to read more about the CM 700.

Attic & Wall Spray Machines

CM-G Series Industrial Fiber Metering


Click here to read more about the 3500 CM-G Series.

The Cool Vac 16: Insulation Removal Vacuum

insulation removal vacuumIndustry standards have changed!! With the present trend for attic retro-fit applications moving towards ‘air sealing’ with foam and re-insulation… performing a total insulation removal may be the only way to identify, access, and foam seal the openings in the attic and eave areas. Many times old insulation (due to moisture, odors, pest control), needs to be removed and replaced.

All professional insulation contractors need to have a solution… Insulation Removal. Our versatile, portable, gas powered vacuum provides a high production insulation removal solution for the professional contractor. Insulation is quickly and efficiently removed from attics, sidewalls, and crawl spaces with ease.

This unit is designed to handle fire, water, and smoke damaged insulation with dependability and speed as well as wall cavity recycle. Fiber intended for recycling can be conveyed directly to your spray machine for reuse.
Waste material can be discharged directly into 75 cu. ft. disposable bags (purchased separately), or directly into a truck or dumpster.

The industry ‘first’ of having a low cost replaceable ‘liner’ or wear strip inside the fan chamber allows a lower cost solution to the extreme wear caused by highly abrasive fibers and foreign debris passing thru the chamber.
A specially designed ‘turbo-sonic – FC’ blade creates fan tip turbulence eliminating any wet fiber accumulation or build-up on the fan blade and chamber area.

High abrasion resistant fan blades are robotically welded with ‘solid’ welds to reduce the chance of a catastrophic failure due to operational stress.

Precision dynamic computerized balancing provides a smooth running blade with minimal wear to engine bearings.

16 h.p. Briggs and Stratton ‘Vanguard’ commercial duty engine (highly regarded as one of the most durable engines in its class), provides ample power to exceed production rates of any system in its class.

Insulation Removal Vacuum Hook-up:

6” input and output tubes for hose hook-up. Weight: 240 lbs.

Various combinations of hose lengths up to 150 ft. can be used effectively. Larger diameter hoses with shortest hose length allow for maximum production rates. Recommended: 25 ft. x 6” dia. hose for exhaust, 125 ft. x 6” dia. hose reduced to 25 ft. x 4” diameter hose for maximum vacuum pick-up in the attic. (Hose priced separately). Consult factory for options.

insulation removal vacuum

insulation vacuum removal